The effect of traffic data source on deterioration rates of heavy-duty flexible pavements

The purpose of this study is to assess the effect of traffic data source (estimated vs. actual) on predicted progression rates of roughness and rutting for heavy-duty flexible pavements of rural freeways. Progression rates are predicted using calibrated HDM-4 models. The assessment is performed in terms of variations in maintenance intervention timing associated with the variations in progression rates. Time series pavement condition data (covering 3–5 years) have been collected for 7 sections of rural freeways for use in calibrating HDM-4 deterioration models. They range in length from 10 to 60.8 km and cover different traffic volumes, climate zones and subgrade soil types. For these sections, estimated annual average daily traffic (AADT), growth factors and assumed loading have been extracted from relevant database. Only six segments of these sections have Weigh-in-Motion (WIM) sites so relevant actual AADT, growth factors and axle load distributions have been extracted from WIM reports. The results of running the calibrated HDM-4 deterioration models using different traffic data show that actual traffic data from WIM sites result in higher rates of deterioration to that of estimated data for four sites, resulting in earlier intervention timing and higher present value agency cost. The other two sites have lower rates with actual data due to lower traffic loading than estimated.     

枞树型核电轮槽精铣刀制造技术优化设计

以枞树型叶根精铣刀为例,阐述了可换硬质合金型线刀体和刀片精铣刀的优化设计、制造工艺、建模及优化设计,进行切削过程加工策略优化和加工过程模拟,设计制造了锥柄专用工装及检测环规、磨削刀片后角专用工装,采用NUMROTO软件编制刀片加工工步。该项目研制的可换刀片精铣刀型线精度完全能达到进口铣刀水平,能满足大部分轮槽与叶根加工对型线精度的要求,可以大幅度节约刀具费用。     

细粒尾矿综合利用技术研究

姑山矿业公司为提高细粒尾矿的综合利用率，研究分析了细粒尾矿的性质，系统研究了尾矿含量、煅烧工艺制度对不同成分体系尾矿陶粒堆积密度、表观密度、空隙率、吸水率、筒压强度及软化系数的影响。研究得出了全尾矿陶粒、细粒尾矿+污泥陶粒、细粒尾矿+污泥+粉煤灰陶粒3种成分体系的尾矿陶粒较优的尾矿含量及煅烧工艺制度，且3种尾矿陶粒均可代替石头用作粗集料。     

An effective method of bulk materials moisture measurement using capacitive sensors

When we speak about capacitance moisture meters for bulk materials we have to face with different values of dielectric permittivity for different bulk materials in dehydrated state, what causes a method error that can be named ‘type uncertainty’. Besides, different varieties of the same material have different values of dielectric permittivity, which depend from geographical origin, processing conditions etc. It can be hardly predicted automatically and type uncertainty can be compensated only in separate situations with the help of preliminary calibration. Main tasks of the research are to develop new comparison principle of moisture measurement with better accuracy due to effective compensation of physical, chemical and granulometric composition influence on the result of moisture measurement, develop new primary and secondary instrument transducers. Moisture sensor consists of four measuring capacitors. Two of them should be filled with a sample, which moisture content should be determined, and other pair of measuring capacitors should be filled with a same substance, but previously dehydrated. Mathematical models, developed to take into account granulometric composition of a bulk material were used to carry out a comparison analysis for three types of instrument measuring transducers. Obtained results proved that suggested principle of moisture measurement provides effective compensation of granulometric composition influence. Developed measuring principle had been experimentally tested what helped to confirm that it provides two times better compensation of different physical and chemical composition for different materials in comparison with the direct comparison method.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

Lewis acid-oxygen vacancy interfacial synergistic catalysis over SO42−/Ce0.84Zr0.16O2–WO3–ZrO2 for N,N-diethylation of aniline with ethanol

Herein, a new mechanism involving Lewis acid-oxygen vacancy interfacial synergistic catalysis for aniline N,N-diethylation with ethanol was proposed, and the SO₄²⁻/Ce_0.84Zr_0.16O₂–WO₃–ZrO₂ catalyst (SCWZ) with both Lewis acid sites and oxygen vacancies was synthesized by the hydrothermal method, which shows better catalytic activity than the reported solid acidic catalysts. Besides, the SO₄²⁻/ZrO₂ (SZ) and SO₄²⁻/WO₃–ZrO₂ (SWZ) catalysts were also prepared and compared with SCWZ to investigate the synergistic effect of each component. The SO₄²⁻ and WO₃ mainly generate Lewis acid by bonding with ZrO₂, which is beneficial for the fracture of the N–H bond in aniline. The Ce_0.84Zr_0.16O₂ solid solution mainly plays a vital role in generating the oxygen vacancies as the interface active species, which can participate in stripping –OH from ethanol, then the carbocation will also be released, which only needs 1.3805 kcal/mol energy, calculated by density functional theory (DFT), to be input. In comparison, the traditional reaction mechanism needs the Brønsted acidic sites to promote the protonation of ethanol, then dehydration and subsequent formation of carbocation followed, and 108.6846 kcal/mol energy needs to be input, which is far higher than that of the new mechanism. The apparent activation energy (E_a) over SCWZ was measured by experiment to be 34.09 kJ/mol, which is much lower than that of SWZ (47.10 kJ/mol) and SZ (54.37 kJ/mol), illustrating comparatively preferable kinetics for SCWZ than that of SWZ and SZ. Besides, the conversion of aniline and selectivity to N,N-diethylaniline over SCWZ reach almost 100% and 73%, respectively. The SCWZ can be renewed for 4 times without rapid deactivation, and the longevity of SCWZ is longer than that of SWZ and SZ, as the loaded SO₄²⁻ and tetragonal ZrO₂ are stabilized by Ce_0.84Zr_0.16O₂ and WO₃, respectively.     

紫金山东南矿段成矿期次、阶段浅析

通过对紫金山东南矿段铜钼(金)矿床地质矿化特征分析,指出铜钼矿化带主要赋存于花岗闪长斑岩的内外接触带,处于似斑状花岗闪长斑岩的上部,金矿化带赋存在表生氧化带的英安玢岩、隐爆角砾岩中。经过对矿石的组构特征、矿物生成顺序等特征分析,将矿床的成矿演化过程分为斑岩热液期、高硫化浅成低温热液期、表生氧化期三个主要矿化期次,进一步将斑岩热液期分为黑云母-钾长石化阶段、石英-绢云母化阶段、碳酸盐化阶段三个阶段;高硫化浅成低温热液期分为地开石化阶段、明矾石化阶段、硅化阶段三个阶段。研究结果为进一步研究矿床成因提供了依据。     

水平衡法与高温转化法在矿泉水氢氧稳定同位素测定中的应用

为了鉴别不同品牌矿泉水标注水源地信息真伪,对11种不同品牌饮用水的氢氧稳定同位素(δD和δ18 O)进行测定。结果表明,水平衡法(GasBench-IRMS)和高温转化法(TC/EA-IRMS)的测定结果一致性较好,两种方法测定6种不同饮用水的δD和δ18 O的平均差异分别为(0.6±1.59)‰和(0.02±0.13)‰。水平衡法需要较长的制备和测定时间,但δD和δ18 O的测定精度明显优于高温转化法。11种饮用水δD和δ18 O变化范围较大,其δD和δ18 O受不同品牌饮用水的水源地降水影响形成明显的地域性。虽然无法区分矿泉水是否由其他类别饮用水伪造,但δD和δ18 O可以为特定区域(如高海拔与沿海地区)以及产地相近的矿泉水水源地鉴别提供依据。     

Empirical surveys of frontier applications: a meta‐review

This contribution is the first attempt to systematically review all empirical surveys that so far have been made available in the broad field of efficiency and productivity analysis using frontier estimation methodologies. We provide a systematic bibliometric review on the many empirical surveys in the field of efficiency and productivity analysis, the most relevant concepts, areas, overlaps, and potentials to explore from its introduction to the most recent surveys. We combine the United Nations’ International Standard Industrial Classification (ISIC) taxonomy for the economic activity with the Journal of Economic Literature (JEL) classification system to classify the empirical surveys and to identify the current gaps in the literature. In addition to the most relevant/generic potential areas for applications (according to the United Nation's ISIC), this methodology provides a cluster analysis with the most relevant concepts that have been considered so far (according to the JEL codes). This overview brings an interesting guide for future work to develop the whole field.